It turns out that our updated 350-601 dumps (2024) will make your 350-601 DCCOR exam journey smoother and more efficient.
Download the new version of 350-601 dumps (2024) at https://www.pass4itsure.com/350-601.html (PDF and VCE formats) now, and you can also try the new Premium plan:
All 4000+ Exam PDF&VCE dumps, One Package, from $199.79!
Mastering the core technologies of implementing and operating Cisco data centers will set you apart in the workplace. 350-601 dumps help the exam and provide you with new 350-601 exam questions for you to study.
Cisco 350-601 exam in 2024
The Cisco 350-601 exam is a certification exam for implementing and operating Cisco Data Center Core Technologies (DCCOR). Its main objective is to assess the candidate’s skills and knowledge in the field of data centers, particularly about applications and practices in networking, computing, storage networking, automation, and security.
As you prepare for the 350-601 exam in 2024, you should focus on the following key points:
- Network configuration and management
- Virtual Storage Area Network (VSAN)
- Automation & Security
- Cloud Computing & Virtualization
- Troubleshooting and performance optimization
And don’t forget, practice with real cases.
Free share 350-601 dumps practice questions 1-15 (2024)
From: Pass4itSure
Related certifications: Cisco CCNP Cisco CCIE
Question 1:
An engineer must remove the running configuration of a Cisco Nexus 9000 Series Switch and replace it with a backup file without restarting the switch. The backup file is stored on an SFTP server that is reachable via the An engineer must remove the running configuration mgmt0 interface.
Which set of commands accomplishes this task?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: C
Question 2:
DRAG DROP
An engineer must configure Cisco UCS Manager to accept only HTTPS connections that use TLS 1 2 The cipher security level must be high and the length of the keyring key value must be 2048 bits.
Drag and drop the code snippets from the right onto the blanks in the code on the left to accomplish these goals. Not all commands are used.
Select and Place:
Correct Answer:
Question 3:
An engineer installed a new Nexus switch with the mgm0 interface in vrf management. Connectivity to the rest of the network needs to be tested from the guest shell of the NX-OS. Which command tests connectivity from the guest shell of the NX-OS?
A. [guestshell@guestshell ~]$ dohost \’\’ping vrf management 173.37.145.84\’\’
B. [guestshell@guestshell ~]$ chvrf management ping 173.37.145.84
C. [guestshell@guestshell ~$ ping 173.37.145.84 vrf management
D. [guestshell@guestshell ~]$ ping vrf management ip 173.37.145.84
Correct Answer: B
Question 4:
An engineer performs a Firmware Auto Install upgrade through the Cisco UCS Manager. Which two Cisco UCS components are upgraded in the Install Server Firmware stage? (Choose two)
A. Cisco UCS C-Series Rack-Mount Server
B. I/O Modules
C. Cisco UCS Manager
D. Cisco UCS B-Series Blade Server
E. Fabric Interconnects
Correct Answer: BE
Question 5:
Which two actions are needed to configure a single Cisco APIC controller for the Cisco ACI fabric for the first time? (Choose two.)
A. Register the APIC that is connected to the switch.
B. Configure the first Cisco APIC controller
C. Configure the leaf switch where the Cisco APIC is connected, using CLI to allow APIC connectivity
D. Register the switches that are discovered through LLDP.
E. Register all leaf and spine switches
Correct Answer: AE
Question 6:
Refer to the exhibit.
What happens to the broadcast traffic when it reaches aggregation switches?
A. Agg-2 switch receives broadcast packets and stops forwarding to the peer link on the Agg-1 switch.
B. Agg-1 switch prevents broadcast packets received on the vPC peer link from exiting the switch on ports Eth2/4 and Eth2/5.
C. Agg-1 and Agg-2 switches receive broadcast packets and do not forward them to the peer link or the port channel.
D. Only the Agg-1 switch receives broadcast packets and does not forward them to the peer link on the Agg-2 switch.
Correct Answer: B
Duplicate Frames Prevention in vPC One of the most important forwarding rules for vPC is that a frame that enters the vPC peer switch from the peer link cannot exit the switch from a vPC member port. Figure shows switches 3 and 4 connected to 5k01 and 5k02 with vPCs Po51 and Po52. If one of the hosts connected to switch 4 sends either an unknown unicast or a broadcast, this traffic may get hashed to port eth2/2 on PortChannel 52. 5k02 receives the broadcast and needs to forward it to the peer link for the potential orphan ports on 5k01 to receive it.
Upon receiving the broadcast, 5k01 detects that this frame is coming from the vPC peer link. Therefore, it does not forward it to port 2/9 or 2/10; if it did, a duplicate frame on switch 3 or 4, respectively, would be created. If a host on switch 4 sends a broadcast, 5k02 will correctly forward it to Po51 on port 2/9 and place it on the peer link.
5k01 will prevent this broadcast frame from exiting onto port 2/9 or 2/10 because this frame entered 5k01 from a vPC peer link. Should eth2/2 on switch 3 go down, port 2/9 on 5k01 would become an orphan port and as a result will receive traffic that traverses the peer link.
Question 7:
Which configuration implements static ingress replication?
A. Interface nve 1 member vni 3719035 ingress-replication protocol static peer-ip 10.0.0.4
B. Interface nve 1 member vni 3719035 ingress-replication protocol bgp
C. Interface nve 1 member vai 3719035 peer step 10.0.0.4
D. Interface nve 1 member vni 3719035 peer step 10.0.0.4 ingress-replication protocol static peer-ip 10.0.0.4
Correct Answer: A
“Configuring Static Ingress Replication” section here: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/vxlan/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_VXLAN_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NXOS_VXLAN_Configuration_Guide_7x_chapter_011.html
Question 8:
Refer to the exhibit.
All switches are configured with the default OSPF priority. Which configuration should be applied to ensure that the SW2 Cisco Nexus switch controls the LSA floods and advertises the network to the remaining nodes in the OSPFv2 area?
A. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 255
B. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 1
C. SW2# configure terminal SW2 (config)# router ospf 1 SW2 (config-router)# router-id 10.10.10.22
D. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 0
Correct Answer: A
Priority in OSPF is mainly used to influence/determine a designated router/backup designated router for a network. By default, the priority is 1 on all routers. A router with a high priority will always win the DR/BDR election process.
Question 9:
An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action must be taken?
A. The FCNS database must be disabled in the fabric.
B. A port channel must be configured to the upstream switch.
C. All switches in the fabric must be Cisco MDS switches.
D. NPIV must be enabled on the upstream switch.
Correct Answer: D
Question 10:
Which storage solution operates at the file level and contains its native lightweight operating system on simplified hardware?
A. NAS
B. SAN
C. unfield fabric
D. standard file server
Correct Answer: A
Question 11:
Refer to the exhibit.
Why does the Python code for Cisco NX-API print an error message?
A. The “type” is wrong in the header of the request and should be “cli_ conf”.
B. NX-API does not allow configuration for features via the requests module.
C. The “type” is wrong in the body of the request and should be “cli_ conf”.
D. The JSON is not a supported format for the NX-API.
Correct Answer: C
Question 12:
Refer to the exhibit.
An engineer needs to implement a monitoring session that should meet the following requirements:
1.
Monitor traffic from leaf-to-leaf switches on a Cisco ACI network
2.
Support filtering traffic from Bridge Domain or VRF Which configuration must be added to meet these requirements?
A. interface eth 1/2 switch 101
B. interface eth 1/2 leaf 101
C. application app1 epg epg1
D. application epg epg1 app1
Correct Answer: C
Question 13:
DRAG DROP
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch.
Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.
Select and Place:
Correct Answer:
Question 14:
A customer data center is configured for the distribution of user roles, call home, and NTP. The data center was split into two geographically separate locations called DC1 and DC2. The requirement is for the user role configurations to be distributed in DC1 and for NTP and call-home features to be constrained to DC2.
Which two configuration sets must be used to meet these requirements? (Choose two.)
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Correct Answer: BD
Question 15:
An engineer configures a storage environment for a customer with high-security standards. The secure environment is configured in van 50. The customer wants to maintain a configuration and active databases and prevent unauthorized switches from joining the fabric. Additionally, the switches must prevent rogue devices from connecting to their ports by automatically learning the WWPNs of the ports connected to them for the first time. Which two configuration sets must be used to meet these requirements? (Chose two.)
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Correct Answer: AC
In addition to this, I’m guessing you’ll need new 350-601 exam study materials.
To this end, the 350-601 exam study materials are collected below:
Have Video Modes You Love:
- Data Center Certification Training Videos
- CCIE Data Center Exam Prep
- CCIE Data Center Training Videos
There are also patterns of books you love:
And the document mode you love:
- Implementing and Operating Cisco Data Center Core Technologies (DCCOR)
- DCCOR study materials
- 350-601 DCCOR
Rest assured, all of them come with links for you to check out. All for your exams, go well.
Maybe you still have doubts about the exam 350-601 DCCOR
What is Exam 350-601 DCCOR?
The 350-601 DCCOR aka Implementing and Operating Cisco Data Center Core Technologies, the exam is 120 minutes long, has 90-110 questions, and the passing score is variable (750-850/1000). CCNP Data Center, CCIE Data Center, and The Cisco Certified Specialist – Data Center Core certifications are all related to the exam.
What kind of material is best for quick preparation for the 350-601 DCCOR exam?
That must be Pass4itSure’s updated 350-601 dumps (2024).
In 2024, how can I pass the 350-601 exam?
This should be done:
Check out the official exam content provided by Cisco to learn about exam topics. Collect effective learning resources, make good use of 350-601 Dumps (2024), and conduct multiple simulation exercises. Remember, the key to success is a combination of thorough preparation, practical experience, and a strategic approach to the exam.
The updated 350-601 dumps (2024) make your journey to exam success smoother and more efficient.
Buy Pass4itSure’s 350-601 dumps https://www.pass4itsure.com/350-601.html now (PDF and VCE formats) now, and you can also try the new Premium plan:
All 4000+ Exam PDF&VCE dumps, one package, from $199.79!, to ensure that you are fully prepared and equipped with the most relevant knowledge to prepare for the 350-601 DCCOR exam.
Come on, a wonderful position is waiting for you.